If you want to know more about the hand-cranked pill machine , please log in to our company :< > Or direct pharmaceutical technology department : <> consulting, our factory will provide you with more professional services! Portable 3 Ply Disposable Masks Non-woven Face Mask With Elastic Earloops Disposable Surgical Face Mask Dongguan Anmeixuan Electronic Technology Co., Ltd , https://www.hyashine.com
Hand shake honey pill machine introduction:
Hand pellet mill designed for processing small pharmacy pills designed, the machine compact appearance, moderate weight, convenient movement, and ensure the necessary pressure pelletizing; press cake, rubbing, a pill-rolling machine to complete, easy to use; the relevant parts with precision, solid sculptured roller to ensure uniform pressure and pressure, nature of the materials and for a variety of pelletized 95 percent; carved hanging the toothed rollers, to ensure the smooth pellets, reverse rounded The patented technology of the shaft ensures that the pellets are evenly rounded; the fine-tuning effect can be achieved by the edge eccentric shaft; without complicated control parts , it is basically maintenance-free; the part in contact with the pellet is alloy steel , which meets hygienic conditions.
Hand shake honey pill machine technical parameters:
1 , pelleting specifications: 6mm
2 , the whole machine weight: 28kg
3 , Dimensions: 400 × 255 × 255
4 , work efficiency: 5-10kg / h
Hand shake honey pill machine instructions :
First, operation and maintenance
1, the machine can be positive, negative rotation, into a pellet using positive inversion is used when cleaning the wiper.
2, mixed with moderate to hard and soft drugs, drug strip when the material is too hard slippage between the two rounds of twist less than pills, medicine strip when the material is too soft will adhere to the groove pill-rolling wheels, the resulting clean-up difficulties.
3, after the machine in position, positive, reverse rotation check rotation is normal, then turn the machine with a wet towel wiping roller press cake and two strips made at the wet surface of the roller shaft, when the pharmaceutical drug article do not adhere In the groove.
4 , the two roller shafts of the pellets can not be wiped with a damp cloth or oil , the surface should be kept clean , no dirt is allowed , and the pellets are guaranteed to be round and smooth.
5, the drug produced a good article, is placed between the cross-pelletizing two rollers, to rotate the roll bar drug form, the rollers are made to fall within a circular tray filled below.
6, each of the oil holes of the machine base, should be added a little oil in the machine downtime and clean each roller, the surface clean.
Â
Second, adjustment and maintenance
1 , press cake and layering roller adjustment
1. Loosen the fixing bolts at both ends of the pressing cake and the side of the strip roller, and rotate the eccentric sleeves at both ends to make the gap between the two rollers uniform.
2. Align the circular arc grooves on the two bead rollers. If the two roller grooves are not aligned, move the movable roller slightly, and then tighten the fixing bolts at both ends.
2. Loosen the fixing bolts at both ends of the base of the pelletizing roller and turn the eccentric sleeves at both ends to make the gap between the two rollers uniform.
3. When repairing replacement parts, be careful not to injure the four pressure rollers.
Â