Sodium Polyacrylate Absorbing Water,Applications Of Sodium Polyacrylate,Adding Salt To Sodium Polyacrylate Henan chinamian foods CO.LTD , https://www.ooossooo.com
The 1GFQ-1 rotary tillage and fertilizer attachment is designed to work efficiently with a 25-horsepower tractor, offering two combined operations based on user needs:
1. Fertilization and rotary tilling for weed suppression.
2. Rotary tilling combined with fertilization for effective soil preparation.
Additionally, it can be used as a single operation depending on the task at hand. Before starting, ensure the entire machine is in proper working condition—check that all components are present, securely fastened, and properly lubricated. Pay special attention to the central transmission box, side transmission box, bearing seat, universal joint, and fertilizer box sprocket. All rotating parts should move smoothly without resistance.
When operating with the tractor, set the hydraulic system control lever to the floating position. Adjust the rotary tilling depth to between 12 and 16 cm, and set the fertilizer application rate to the desired amount. The weir height should be set to 10 cm, while the width of the weir should range from 110 to 120 cm.
To extend the service life of the equipment, it's recommended to perform an initial 1–1.5 hour no-load run before beginning actual farming. During this period, monitor all components for unusual noises or signs of malfunction. If any issues arise, stop the machine immediately and address them. At the end of the running-in period, drain the oil, clean the gearbox, and check the meshing of the bevel gears. If the gear meshing is satisfactory, refill the gearbox with the appropriate lubricant. If not, adjust according to the user manual instructions. The normal backlash between gears should be between 0.15 and 0.25 mm. If it exceeds this range, make necessary adjustments.
During operation, if any damage is detected, repair or replace the affected parts promptly. After each shift, clean off all mud and dirt from the machine. At the end of the day, empty and clean the fertilizer tank, and store the equipment in a dry, well-ventilated area. Remove the chain, transmission pipe assembly, and press wheel assembly and store them separately. If the machine will not be used for an extended period, perform a complete cleaning to prevent rust and damage.