This classification mainly includes the aluminum or zinc alloy die casting parts using in Planer Machine area,the raw material is aluminum or zinc alloy. In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.The Casting General Tolerance is Grade GB-CT4. Aluminum Casting Planer Machine Parts Housing,Die Casting Planer Machine Parts Housing,Aluminum Planer Machine Parts Housing NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.casting-part.com
Process Technology: High pressure die casting, Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Machinery Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo
Peach gum disease can be non-invasive or infectious, and it often stems from a combination of environmental stress, improper cultivation practices, and pest infestations. Non-invasive gum disease is commonly caused by frost damage, pests, over- or under-watering, incorrect fertilization, excessive pruning, over-bearing, compacted soil, or high soil acidity. To manage and prevent this condition, it's essential to improve overall tree health through proper care. This includes enhancing orchard drainage, increasing organic fertilizer use, improving soil structure, and practicing reasonable pruning while minimizing trunk injuries. Additionally, it's important to control pests such as aphids, especially the peach aphid. During winter and early spring, painting branches with white lime wash can help protect against cold and sunscald. In early spring, affected areas should be scraped off, and the wounds treated with 5° Baumé lime sulfur followed by a layer of white lead oil or coal tar.
Infectious gum disease, on the other hand, is caused by a fungus in the subphylum Trichomycota and primarily affects the branches. It has two peak periods during the year: one from late May to late June, and another from early August to mid-September. To control the disease, apply 5° Baumé lime sulfur or 50% mancozeb wettable powder diluted 800 times before bud break in early spring. This should be done once every 10 days for a total of three sprays. From late March to early April, spray 72% streptomycin sulfate at 4000–5000 times dilution, once every 7 days for 2–3 applications. Alternatively, 50% mancozeb WP at 800 times, 50% carbendazim at 800–1000 times, or 50% thiophanate-methyl at 1000–1500 times can also be used, sprayed once every 10 days for up to 3–4 times.
During the active blooming period (May to June), you can use 50% Tuzet WP at 800 times, 70% mancozeb WP at 500 times, or 80% anthracene WP at 800 times, applying once every 7–10 days for 3–4 times. It's best to alternate between these pesticides for better effectiveness. In winter, all infected branches and trunks should be removed, burned, and the remaining trees sprayed with lime sulfur to disinfect and prevent further spread.